Replace Lock in UPVC Door
If you've got a upvc door lock that isn't functioning properly, you must call an expert locksmith. They are fast, efficient and can complete the task to a very high standard.
Changing a upvc barrel lock isn't that difficult to do. You just need to know what is involved and follow the steps below.
Take off the barrel lock.
uPVC windows and doors are popular in a variety of properties. They let natural light enter the home and can be opened easily with the right key. It takes just five minutes to change the barrel of a lock on uPVC uPVC. If you've lost your keys, or a tenant has left but has not returned them or the barrel of your lock is damaged, this is a quick solution.
The first thing you need to do is to take off the screws that hold the handles. The handles will be moved out of the way so that you can access the lock barrel screws. Be cautious not to loosen the screws too fast because this could cause damage to the handles or cause them to fall off while working.
Once the screws are removed After removing the screws, look for the screw that is on the inside of the door that is holding the lock to the barrel. This screw stands out and is different in color from the other screws on the door. Utilizing the Phillips screwdriver, take out this screw. You can take the key you use to open the lock and insert it into the barrel. Then, turn it to the right as far as you can. This will open the barrel and make it easier to remove the door.
After you've loosen the screw, it's time to break the pins holding the euro cylinder in the position. To do this, you will require pliers that are strong or mole grips. Grab the protruding part of the euro cylinder and bend it up and down and from side to side. This will break the support pins that hold it in place.
When the old cylinder is out, you are able to start the process of putting in the new one. To ensure you purchase the right replacement, you need to first determine the cylinder's size. This can be done by measuring the distance between the middle of the circular keyhole and the center of square spindle. The measurement should be taken from the upper spindle.
Change the Cylinder
The euro cylinder is the principal locking mechanism for a upvc door. It is easy to replace and doesn't require a locksmith or handyman. If upvc window lock mechanism replacement isn't protected by this security, you need to replace it with one that has. They aren't expensive and could save you money and hassle in the event that your locks are compromised.
Open the door and stand in the front of it. This allows you to reach the screws that hold the handle with your hand or an appropriate tool. Loosen this a little perhaps one quarter turn to start the process.
Once this is done the cylinder should slide out easily since it is no longer fixed by the screw. Next, you'll need to decide on the size of the replacement cylinder you require. There are around 25 different sizes to pick from. You should bring your old cylindrical when you buy the new one to ensure it fits.
If you aren't certain of the size then measure from the center of the screw hole to the end of the cylinder. This is the only way to make sure you're getting the right size cylinder for your upvc doors.
Insert the new cylinder into your door the opposite way you removed the old one. It may be a little difficult to align the lock cam but it is usually an issue with alignment and should come right eventually.
The next step is to install the long screws for securing. After this, you can check that the cylinder is secure within the door. Then, you can reattach the handle to the door and then test it again. If everything is working properly the cylinder lock on your upvc doors has been replaced and you have added an extra layer of security to your home.
Change the handle
There are a variety of reasons the handle of a door or door knob can become loose. It can be due either to wear and tear of the handle or the square spindle inside the handle. In this case the door handle will need to be replaced.
First, ensure that the door is propped open and can't close between taking off and replacing the handle. Remove the screws from the inside face of the handle plate using the screwdriver. This will free your handle from the plate. Don't lose the screws, as you will need to re-screw them later.
You can now take off the handles to access the cylinder lock inside the door. The cylinder lock will be round or bulb-shaped, and is only used for multi-point locks on upvc and some aluminum doors. It is similar to changing the handle, except that you will need to remove the old cylinder from the door and replace it with a brand new one.
It is crucial to consider the dimensions of the replacement handle when choosing one. Make sure the handle you choose is of a similar size to the original as it will need to be able to slide over the screws that hold the handle in place. You can start by consulting a size table that provides the most popular sizes of replacement handle plates and their keyhole centers.
It is also worth considering upgrading your handles on your doors made of upvc to higher security standards like the Sold Secure SS301 or 2* Kitemark set of security handles. This will increase the security of your home and make it easier to operate your door. The price of these sets may be a bit more expensive, but the added security and peace of mind security is worth it. You don't want to have to push the door handle constantly upwards and downwards to open and close it.
Changing the Lock
The lock on your uPVC door could be a vulnerable point for thieves. Upgrade your uPVC to a multipoint locking system to ensure it's secure. This would include a deadbolt and an open hook to ward off the intruders. A professional locksmith can assist you with this, however it is also possible to complete the work yourself. You will need some tools, but the process is easy and quick.
The first step is to loosen the screws that are holding the handle. You can take the screws off using a screwdriver and put them in a safe place. Then, you lift the handle up to reveal the screw that holds the cylinder in the position. This screw can be unscrewed and replaced with a new one. You should make sure that the screw is identical to the original. It must be aligned correctly with the barrel of lock.
Changing the lock of your uPVC is a daunting task. You rely on it to secure your home, and making a mistake could result in you not being able to unlock the door. If you are able to figure it out, it's fairly simple and costs less than calling professional locksmiths.
To change the lock on your uPVC door, you'll have to get access to the inside faceplate of the lock. You must be able to see the screw that is located inside the door and the retaining bolt on the outside of the door. Once you have these screws in your hands, you are able to remove and replace the faceplate.
It is possible to replace the lock of your uPVC door for a variety of reasons. You might need to alter the lock on your uPVC doors for various reasons.
Anyone with a basic DIY skill can alter a uPVC locking mechanism. You will need to inspect the internal hinges of the mechanism. This can be difficult to do if the lock is sticking. If the hinges have been lubricated then it is simple to repair. If you aren't sure you can do it, consult a professional.